Table of Contents
Advertisement
User manual SanStore-4EM / SanStore-8EM
4. QUICK START
To turn on the DVR, press the [POWER] button on the front panel or on the remote control.
When the recorder is powered on, the live viewing screen will appear in about 30 seconds.
Before starting the quick setup, make sure to stop all recordings. While the DVR is
recording, the time and recording menu are not active.
When prompted for a password, enter it using the numeric buttons.
The factory default password is "000000".
Time and date setting:
When the DVR is powered on for the very first time, the time and date are set as default to
January 1, 2006 Sunday 01:00:00. Before any other operation of the Digital Video Recorder,
it is important to setup the time and the date.
_________________________________________________________________________________
- 17 -
Advertisement
Table of Contents
