Reset To Factory Default; Automatic Sound Effects; Conventional Dc Operation - M.T.H. Premier Swiss 6/8 Type II Crocodile Electric Engine Operator's Manual

Normal Operation
Place
Horn
Engine in
Neutral

Reset to Factory Default

To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in Neutral tap the Horn button quickly once, followed by five
quick taps of the Bell button, allowing approximately ½ second to lapse between each
quick button press. Two horn blasts will indicate that the engine has made the change.
Place
Horn
Engine in
Neutral

Automatic Sound Effects

Certain Proto-Sound 3.0 sound effects automatically play in programmed conventional
mode conditions:
•Squealing Brakes play any time the engine's speed decreases rapidly.
•Cab Chatter plays at random intervals when the engine idles in neutral.
•Engine Start-up and Shut-down sounds play when the engine is initially
powered on or is powered off for five seconds or more.

Conventional DC Operation

Your MTH locomotive will operate on conventional DC track voltage also. However,
functions such as blowing the whistle, ringing the bell, and the PSA sounds cannot be
initiated in conventional DC. Only the steam chuffing sounds with synchronized
puffing smoke, squealing brake sounds, and idle sounds will function.
Operation of your MTH Proto-Sound 3.0 engine in conventional DC is very similar to
operating a conventional AC engine. As you increase track voltage, engine speed
increases.
As the track voltage is decreased, engine speed is decreased. When track voltage polarity
is reversed using the polarity or direction switch on the power pack, the engine will run
Bell Bell Bell
Bell Bell Bell
®
Premier Swiss Crocodile Electric Engine
Running in Wrong Direction
Wrong Direction Running Lights
=
Bell
(Repeat to Return
to Previous Lighting)
=
Bell Bell
(indicates change is made)
16
Red
Reset
Two Horn Blasts
Repeat to Return
to Normal Condition