Traction Tire Replacement Instructions; Headlight Replacement Instructions - M.T.H. Premier Swiss 6/8 Type II Crocodile Electric Engine Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

Traction Tire Replacement Instructions

Your locomotive is equipped with two neoprene rubber traction tires on each powered
truck block. While these tires are extremely durable, they may occasionally need
replacement.
1. Locate the driver wheel set that has the traction tires.
2. Remove the bolt that attaches the side rod to this wheel(s)
3. Swing the side rod away from the driver wheel.
4. Make sure the old tire has been completely removed from the groove in the drive
wheel, using a razor blade or small flathead screwdriver to pry away any remains.
5. Slip the new tire onto the wheel. You may find it useful to use two small flathead
screwdrivers to stretch the tire over the wheel.
6. If you twist the tire while stretching it over the wheel, you will need to remove and
reinstall the tire. Otherwise your engine will wobble while operating.
7. Make sure the tire is fully seated inside the groove. Use a razor blade to trim away
any excess tire that will not seat inside the groove properly.
8. Reassemble in the reverse order.

Headlight Replacement Instructions

The PS 3.0 headlights and other associated lights are small LEDs that require a lot less
power and generate a lot less heat than incandescent bulbs, resulting in extremely long
life compared to the incandescent bulbs. The LEDs are not user serviceable
Premier Swiss Crocodile Electric Engine
40

Advertisement

Chapters

Table of Contents
loading

Table of Contents