Reset To Factory Default; Automatic Sound Effects; Conventional Dc Operation - M.T.H. Premier Bavarian Class 3/6 Express Operator's Manual

Steam locomotive
Table of Contents

Advertisement

Available languages

Available languages

For Era I Engines (Special Service Operation):
Announcing a Special Train
For Era II Engines (Wrong Line Operation):
Forward (Boiler)
red
Place
Horn
Engine in
Neutral

Reset to Factory Default

To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in Neutral tap the Horn button quickly once, followed by five
quick taps of the Bell button, allowing approximately ½ second to lapse between each
quick button press. Two horn blasts will indicate that the engine has made the change.
Place
Horn
Engine in
Neutral

Automatic Sound Effects

Certain Proto-Sound 3.0 sound effects automatically play in programmed conventional
mode conditions:
•Squealing Brakes play any time the engine's speed decreases rapidly.
•Cab Chatter plays at random intervals when the engine idles in neutral.
•Engine Start-up and Shut-down sounds play when the engine is initially
powered on or is powered off for five seconds or more.

Conventional DC Operation

Your MTH locomotive will operate on conventional DC track voltage also. However,
functions such as blowing the whistle, ringing the bell, and the PSA sounds cannot be
initiated in conventional DC. Only the steam chuffing sounds with synchronized
puffing smoke, squealing brake sounds, and idle sounds will function.
Premier Bavarian Class 3/6 Express Steam Locomotive
Forward (Tender)
Bell
Bell
Bell
Bell
Bell
Bell
®
red
Reverse (Boiler)
red
Alternate Operation Lighting
=
Bell
(Repeat to Return
to Normal Operation Lighting)
=
Bell
Bell
16
Reverse (Tender)
red
Reset
Two Horn Blasts
(indicates change is made)
Repeat to Return
to Normal Condition
red

Advertisement

Chapters

Table of Contents
loading

Table of Contents