Suzuki Burgman UH125 Service Manual page 351

TRANSMISSION
ITEM
Reduction ratio
Final reduction ratio
Drive V-belt width
Movable driven face spring free
length
INJECTOR + FUEL PUMP + FUEL PRESSURE REGULATOR
ITEM
Injector resistance
Fuel pump discharge amount
Fuel pressure regulator operating
set pressure
FI SENSORS
ITEM
CKP sensor resistance
CKP sensor peak voltage
IAP sensor input voltage
IAP sensor output voltage
TP sensor input voltage
TP sensor output voltage
ECT sensor input voltage
ECT sensor resistance
TO sensor resistance
TO sensor output voltage
Injector voltage
Ignition coil primary peak voltage
HO2 sensor resistance
HO2 sensor output voltage
THROTTLE BODY
ITEM
I.D. No.
Bore size
Idle r/min
Throttle cable play
SPECIFICATION
Variable change (2.829 – 0.744)
9.166 (44/16 × 50/15)
130.0
SPECIFICATION
Approx. 12 Ω at 21 °C
40 ml and more
For 10 sec., 300 kPa (3.0 kgf/cm²)
Approx. 250 kPa (2.5 kgf/cm²)
SPECIFICATION
158 – 238 Ω
2.0 V and more (When cranking)
4.5 – 5.5 V
2.66 – 3.68 V (70 – 101 kPa, 15 – 35 °C)
4.5 – 5.5 V
Closed
Opened
4.5 – 5.5 V
Approx. 2.45 kΩ at 20 °C
16.5 – 22.3 kΩ
Normal
Leaning
Battery voltage
150 V and more (When cranking)
11.7 – 14.5 kΩ
Idle speed 0 – 1.0 V and less
3 000 r/min 0 – 1.0 V and more
SERVICING INFORMATION
22.4
Approx. 0.65 V
Approx. 3.96 V
0.4 – 1.4 V
3.7 – 4.4 V
SPECIFICATION
03H0
26 mm
1 800 ± 100 r/min
2.0 – 4.0 mm
10-41
Unit: mm Except ratio
NOTE
—
—
21.4
123.5
NOTE
—
—
—
NOTE
+ probe: W,
- probe: G
+ probe: O/W,
- probe: Ground