Suzuki Burgman UH125 Service Manual page 242

8-28 CHASSIS
• Insert the front fork inner tube top end into the steering stem
all the way until the step of mounting hole has been con-
tacted.
• Tighten the clamp bolts temporarily.
FRONT FORK CAP BOLT
• Install new O-ring to the front fork cap bolt and apply fork oil.
• Install the front fork cap bolt temporarily.
• Tighten the front fork clamp bolts 1 to the specified torque.
$ Front fork clamp bolt: 23 N·m (2.3 kgf-m)
• Tighten the front fork cap 2 bolt to the specified torque.
$ Front fork cap bolt: 45 N·m (4.5 kgf-m)