Final Gear Box Oil - Suzuki Burgman UH125 Service Manual

2-10 PERIODIC MAINTENANCE
• Replace the O-ring 3 with a new one.
• Install new oil filter.
• Install the spring 4 to the oil filter cap.
• Replace the O-ring 5 with a new one.
NOTE:
Apply engine oil to the new O-ring 5.
• Install the oil filter cap.
• Pour fresh oil.
• Check the oil level.
$ Engine oil capacity
Oil change
Filter change
Overhaul engine : 1 500 ml

FINAL GEAR BOX OIL

Inspect every 8 000 km (5 000 miles, 40 months) there-
after.
• Remove the cooling fan cover. ("2-5)
• Remove the bolts and then move the air cleaner box upward.
• Remove the clutch cover 1.
• Place an oil pan below the final gear case.
• Remove the oil level plug 2 and inspect the oil level. If the
level is below the level hole, add oil until it flows out from the
level hole.
$ Oil viscosity and classification:
• Tighten the oil level plug 2 to the specified torque.
# Oil level plug: 12 N·m (1.2 kgf-m)
: 1 200 ml
: 1 300 ml
SAE 10W-40 with SF or SG