Suzuki Burgman UH125 Service Manual page 271

• In this condition, check the "rim line" B cast on the tire side
walls. The line must be equidistant from the wheel rim all
around. If the distance between the rim line and wheel rim
varies, this indicates that the bead is not properly seated. If
this is the case, deflate the tire completely and unseat the
bead for both sides. Coat the bead with lubricant and fit the
tire again.
• When the bead has been fitted properly, adjust the pressure
to specification.
• As necessary, adjust the tire balance.
#
Do not run with a repaired tire at a high speed.
% Cold inflation tire pressure
Solo riding
(2.00 kgf/cm²)
Dual riding
(2.00 kgf/cm²)
Front
200 kPa
(2.25 kgf/cm²)
200 kPa
(2.80 kgf/cm²)
Rear
225 kPa
280 kPa
CHASSIS 8-57