Cooling Fan; Inspection; Removal; Installation - Suzuki Burgman UH125 Service Manual

COOLING FAN

INSPECTION

• Remove the lower leg shield. ($8-7)
• Remove the clamp.
• Disconnect the cooling fan lead wire coupler 1.
• Test the cooling fan motor for load current with an ammeter
connected as shown in the illustration.
• The voltmeter is for making sure that the battery 2 applies
12 V to the cooling fan motor 3. With the cooling fan motor
with electric motor fan running at full speed, the ammeter 4
should be indicating 2.1 A and under.
• If the fan motor does not turn, replace the motor assembly
with a new one.
NOTE:
When making above test, it is not necessary to remove the cool-
ing fan.

REMOVAL

($7-4)

INSTALLATION

($7-5)
COOLING AND LUBRICATION SYSTEM 7-7