Suzuki Burgman UH125 Service Manual page 32

FRONT BRAKE FLUID REPLACEMENT
• Place the motorcycle on a level ground and keep the handle-
bars straight.
• Remove the front master cylinder reservoir cap and dia-
phragm.
• Suck up old brake fluid as much as possible.
• Fill the reservoir with new brake fluid.
( Specification and classification: DOT 4
• Connect a clear hose to the air bleeder valve and insert the
other end of the hose into a receptacle.
• Loosen the air bleeder valve and pump the brake lever until
old brake fluid is completely out of the brake system.
• Close the air bleeder valve and disconnect the clear hose. Fill
the reservoir with new brake fluid to the upper end of the
inspection window.
# Air bleeder valve: 6 N·m (0.6 kgf-m)
NOTE:
Front brake caliper has two air bleeder valves.
COMBINATION BRAKE FLUID REPLACEMENT
The combination brake fluid replacement is the same manner as
the front one.
PERIODIC MAINTENANCE 2-17