STARTER SYSTEM
To Fuel pump
TROUBLE SHOOTING
NOTE:
Make sure the fuses are not blown and the battery is fully-charged before diagnosing.
Starter motor will not run.
Step 1
1) Grasp the front or rear brake lever, turn on the ignition switch with the engine stop switch in the "RUN"
position and side-stand switch in the "ON" position.
2) Listen for a click from the starter relay when the starter button is pushed.
Is a click sound heard?
YES
Go to Step 2.
NO
Go to Step 3.
Step 2
1) Check if the starter motor runs when its terminal is connected to the battery + terminal. (Do not use a thin
wire because a large amount of current flows.)
Does the starter motor run?
• Faulty starter relay.
YES
• Loose or disconnected starter motor lead wire.
• Loose or disconnected between starter relay and battery + terminal.
NO
Faulty starter motor.
Main relay
Engine
stop
switch
Side-
stand
switch
Side-stand relay
15 A
Brake start relay
ELECTRICAL SYSTEM
30 A
Ignition switch
Brake switch
Battery
Starter relay
Starter motor
9-13