Configuring Live Feed Displays - HIKVISION DS-7200HGHI-SH Series User Manual

Single Screen/Multi-Screen: Click to switch the display mode.
Previous Screen/Next Screen: Click to view the previous/next set of display. In a 2x2 mode,
this will show the next four display. In a 3x3 mode, this will show the next nine display.
Start/Stop Auto-Switch: Click to start/ stop auto-switch. Auto-switch will cycle through selected
cameras. Switching of camera can be based on an individual or multiple cameras.
Start Recording: Click the Continues Record/Event Record item. This will bring up an attention
box shown below. If you click yes, it will start all-day continues/event recording of all channels.
Note:
1. Before you start Auto-switch, you should set Dwell Time in Live View setting menu by
going to Menu > System Configuration > Live View > General.
2. After 20 seconds of inactivity, the DVR will automatically exit out of the Display menu
and go back into the Live Feed mode.
3. The auto lock menu setting is selected by default, meaning the Admin password must
be enter to exit out of the Live Feed into the Main Menu.

Configuring Live Feed Displays

Live Feed displays can be customized to your own needs.
To customize display settings:
1. Set language, CVBS output standard, resolution and so on by going to Menu > System
Configuration > General > Display, as shown in Figure 58.
58