Smart Search; Playing Back Tags - HIKVISION DS-7200HGHI-SH Series User Manual

3. In Full-Screen mode, you may select additional channels to playback by clicking the
checkbox next to the desired camera in the Channel Selector panel. Playback will begin
simultaneously on the selected channels.
4. You may stop playback on any of the channels by un-checking the checkbox next to the
channel.
5. You can also select recording in Full Screen mode by double click the date on the
calendar.
Note:
Up to 16 channels can be played back at the same time.

Smart Search

In order to locate motion detection event easily and accurately in the playback progress line, the
users are allowed to analyze a certain area (scene) dynamically, and to get all of the related
motion detection events that occurred in this area.
Note:
The smart search function is available for single-channel playback only.
To use this function:
1. Enter the playback interface and play the video.
2. Move your mouse into the video window and drag an area for motion detection
analysis .The button
choosing the full screen area.
3. After selecting the area, click
easily from the long time line. Time line turns to red when motion detection events
happen.
4. You can get the scene you need conveniently by moving the green vertical line or you
can click
5. To launch Smart Playback, press
in normal speed, others will be in fast speed.
6. You can also do the smart search in Full Screen mode, as shown in Figure 44 by
clicking to pop-up the tool bar as

Playing Back Tags

1. Enter the Tag interface, shown in Figure 76 by going to Menu > Playback > Tag.
is used for clearing all the area, and the button
to search, you will get the motion detection events
and to move between the neighbor events.
to start. Record periods with event will be played
.
is used for
73