Adding A New Remote/Local User - HIKVISION DS-7200HGHI-SH Series User Manual

To change the password:
1. Click to pop up the Edit User menu, as shown in Figure 91.
Figure 91 Edit User Menu
2. Enter the old password in the Old Password textbox.
3. Check the Change Password checkbox.
4. Enter the new password in the Password textbox.
5. You can enter the User's MAC Address of the remote PC. If it is configured and enabled,
it only allows the remote user with this MAC address to access the device.
6. You can also enter the User's IP Address of the remote PC. If it is configured and
enabled, it only allows the remote user with this IP address to access the device.
7. Click the OK button to save the setting and back to the up level.

Adding a New Remote/Local User

You may add up to 31 new users to your DVR.
To add new users:
1. On the User interface shown in Figure 59, click Add to enter Add User interface, as
shown in Figure 92.
Figure 92 Add User Menu
85