Checking The Status Of Your Dvr - HIKVISION DS-7200HGHI-SH Series User Manual

Figure 44 DST Settings Menu
5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the
Enable NTP checkbox. You can set the interval and enter your own NTP server.
6. Click the Apply button to save the settings and click
Clicking

Checking the Status of Your DVR

The current status of your DVR can be checked at any time by going to the System Information
menu. The System Information menu, as shown in Figure 45, can be accessed by going to
Menu > System Information.
without clicking the Apply button will exit the menu without saving.
to exit out of the menu.
47