Managing HDD Group
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto
a particular HDD group through HDD settings. To managing HDD Group:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 159.
3. Select the Mode to Group, as show in Figure 160.
Figure 160 Group Mode Settings Menu
4. Click the Apply button to pop up an attention box as shown below:
Figure 161 Attention for reboot
5. Click Yes to reboot and make the settings effective. Click No to cancel the operation.
6. After rebooting, you can configure local HDD settings. To configure local HDD settings
by going to Menu > System Configuration > HDD > HDD Information.
1) Select a HDD and click
Figure 162.
Figure 162 Local HDD Settings
to pop up the Local HDD Settings menu as shown in
130