HIKVISION DS-7200HGHI-SH Series User Manual page 57

Hide thumbs Also See for DS-7200HGHI-SH Series:
Table of Contents

Advertisement

Figure 55 Analog Camera Image Settings Menu
3. For analog camera, there are four preset modes for selection: Standard, Indoor, Dim
Light and Outdoor. You can select one according to the real situation.
4. You can also adjust the image parameters like Brightness
, Hue
immediately on the screen.
Click Default will restore the default settings.
If the same settings can be applied in other channels, click the Copy button to pop-
up a Copy to box and check the corresponding checkbox. Click the OK button to
save and back to Image Setting menu. Click Cancel to exit without saving.
Click OK to save the settings and return to the Live Feed mode.
5. For IP camera, only Customize is supported. You can adjust the Brightness, Contrast,
Saturation and Hue by dragging the corresponding icon. Click the OK button to save the
settings and back to the Live Feed mode.
You can also enter the Image setting menu by going to Menu > Cameras Setup > Image, as
shown in Figure 56. The steps are similar to the live feed icon setting steps. If the same settings
can be applied in other channels, click the Copy button to copy it to other channels.
Figure 56 Image Settings Menu
by dragging the corresponding icon. The effect will be displayed
, Contrast
, Saturation
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds-9000hqhi-sh seriesDs-7300hqhi-sh series

Table of Contents