HIKVISION DS-7200HGHI-SH Series User Manual page 68

2) Select a day from Monday to Sunday.
3) Setup time periods for schedule. If the All Day checkbox is checked, recording will
occur over the entire day. To setup multiple time periods, uncheck All Day and enter
the Start/ End Time for the selected day. You can select recording type for each
period.
4) Click the Apply button to save the settings.
5) Repeat the above steps to set record schedule for other days in this week. If the
schedule can also be applied to other days, click the Copy button to pop-up a Copy
to box, as shown in Figure 69.
Figure 69 Copy to
6) Check the corresponding checkbox of the day to copy the record schedule to.
7) Click the OK button to save the settings and back to upper level menu or click the
Cancel button to back without saving.
8) Click the Apply button to save the settings and click OK to exit.

Draw the schedule
1) Click
means no recording.
2) Use the mouse to drag and draw time periods in the assigned area. Up to 8
discontinuous periods can be configured for each day.
3) Repeat the above steps to set record schedule for other days in the week.
4) Click the Apply button to save the settings or click
6. Repeat the above steps to set record schedule for other channels. If the same schedule
can be applied to other channels, click the Copy button to pop-up a Copy to box, as
shown in Figure 70.
to select a recording type. None
to exit without saving.
67