Configuring Video Quality Diagnosis - HIKVISION DS-7200HGHI-SH Series User Manual

Figure 129 Video Loss Detection Menu
2. Select the camera to setup video loss detection in using the camera dropdown list.
3. Click Enable Video Loss Detection.
4. Press the Handing Set button to set up handing method.
1) Select the Arming Schedule tab to set the arming schedule. Up to 8 periods can be
configured. If the same schedule can be applied in other channel, click Copy.
2) Select the Handing tab to set the actions to take if tamper-proof is detected.
5. Click the Apply button to save the settings. Click OK to back to the previous menu.
6. If the same settings can be applied in other channels, click Copy to copy the same
configuration to other channels.
7. Click Apply to save the settings.

Configuring Video Quality Diagnosis

Video Quality Diagnosis can be enabled on any of the analog channels on your DVR to detect
the video quality, and alarm user if video quality get worse to a threshold.
To configure video quality diagnosis:
Enter the Video Quality Diagnosis menu, shown in Figure 130 by going to Menu >
1.
Cameras Setup > Video Quality Diagnosis.
113