Setting Date And Time - HIKVISION DS-7200HGHI-SH Series User Manual

Setting Date and Time

It is extremely important to setup the system date and time to accurately timestamp recordings
and events.
Set up date and time as follows:
1. Enter the System Configuration menu by going to Menu > System Configuration >
General.
2. Select the Time/Date tab, as shown in Figure 43.
Figure 43 System Configuration Menu
3. The current system time and date as well as the time zone will be displayed. Using the
directional buttons on the front panel/remote or the mouse, select the correct date, time
and time zone.
4. To enable Daylight Savings Time, click and check the Enable DST checkbox and there
will pop-up the DST Setting menu, as shown in Figure 44. You can check the Auto DST
Adjusting checkbox or manually check the date of the DST period and click the Apply
button to confirm the setting. Click the OK button to return to the up level menu.
46