HIKVISION DS-7200HGHI-SH Series User Manual page 141

2. Select the OK button to restore factory defaults or select
menu.
Note:
Network information such as IP address, subnet mask and gateway will not be restored.
Network Detection
You can view the network traffic to obtain real-time information and connecting status of your
DVR.
To view network traffic:
1. Enter the Network Detection menu by going to Menu > System Maintenance > Network
Detection.
2. Select the Traffic tab and you can view the sending rate and receiving rate information
on the interface, as shown in Figure 173. The traffic data is refreshed every 1 second.
Figure 173 Traffic Detection
To configure network detection:
1. Enter the Network Detection menu by going to Menu > Maintenance > Network
Detection.
2. Select the Network Detection tab to enter the Network Detection menu, as shown in
Figure 174.
to return to the previous
140