Menu
5. Click the Close icon to return to the Live Feed mode.
Note:
PTZ parameters for the camera must be set correctly before the PTZ can be controlled.
Digital Zoom Mode:
Enable digital zoom on the selected channel. Once enabled, the regular feed will be shown in
the lower right corner while the zoomed in view will be shown on the full screen. The zoomed in
region may be changed by moving the red rectangle in the regular feed window, as shown in the
Figure 54. Right click to back to the Live Feed mode.
Figure 54 Digital Zoom
Image Settings:
Set the image mode and image parameters like brightness, contrast, saturation, hue and so on
for selected display. To adjust the image settings of a display as following steps
1. Select display.
2. Click the Image Settings icon. This will bring up the Image Settings menu, analog
camera is shown in Figure 55.
:
55