Configuring Ddns - HIKVISION DS-7200HGHI-SH Series User Manual

4. If you have a DHCP server running and would like your DVR to automatically obtain an
IP address and other network settings from that server, check the DHCP checkbox.
5. If you would like to configure your own settings, enter the settings for:

IP Address: IP address you would like to use for your DVR.

Subnet Mask: Subnet Mask of network.

Default Gateway: IP address of your Gateway. Typically the IP address of your
router.

DNS Server: The preferred and alternate Domain Name System (DNS) Server to be
used with your DVR.
6. Click the Apply button to save the settings.

Configuring DDNS

Dynamic DNS allows you to create a hostname and associate it to your IP address, making
access to your DVR over the internet easier. To configure DDNS:
1. Select the DDNS tab to enter the DDNS settings interface, as shown in Figure 86.
Figure 86 DDNS Settings Menu
2. Check ezviz Cloud to enable the P2P service.
3. Check Stream Encryption to use higher security-level data stream.
4. Check the Enable DDNS checkbox.
5. Select a DDNS type from the DDNS Type selection box. Five different DDNS types are
selectable: IPServer, DynDNS, PeanetHull, NO-IP, hkDDNS.

IPServer: Enter Server Address for IPServer.

DynDNS:
1) Enter Server Address for DynDNS.
2) Enter the domain obtained from the DynDNS website in the Domain Name
textbox.
3) Enter the User Name and Password registered in the DynDNS website.

PeanutHull: Enter the User Name and Password obtained from the PeanutHull
website.

NO-IP:
1) Enter Server Address for NO-IP.
81