Changing The Permission Of User - HIKVISION DS-7200HGHI-SH Series User Manual

2. Enter the information for new user, including User Name, Password, Level and User's
MAC and IP Address.
Level: Set the user level to Guest or Operator. Different user levels have different default
operating permission.

Guest: Guest has the default permission of local log search and remote log search.

Operator: Operator has the default permission of local log search, remote log
search, two-way audio and camera configuration.
3. Click the OK button to confirm adding the user. Once a new user has been created, the
fields behind Users will become editable, as shown in Figure 93.
Figure 93 User Settings Menu

Changing the permission of User

The Administrator can change the permission of both guest and operator. To change the
permission:
1. Enter the User menu, shown in Figure 94 by going to Menu > System Configuration >
User.
2. Click to enter the Permission interface, as shown in Figure 91, 92, 93.
Figure 94 Local Configuration Permission Settings Menu
86