Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
ITEM
Rated Voltage
Rated Amperage
Batteries
Scrub Brush Motors
Vacuum Motor
Propelling Motor
Mass (GVW)
Weight empty without batteries
Solution Control
Solution tank capacity
Recovery tank capacity
Scrub brush diameter for 34 in. (86 cm) disk
scrub head
Scrub brush diameter for 34 in. (86 cm)
cylindrical scrub head
Scrub brush length for 34 in. (86 cm) cylindrical
scrub head
Scrub brush pressure
Scrub brush speed (Disk)
Scrub brush speed (cyl)
Tires
Maximum speed
Coverage
Frame construction
Brakes
Minimum aisle u-turn width
SPECIAL NOTES:
The sound pressure level at the operator's ear
was measured to be 76 dBA. This was a
nearfield, broad-band measurement taken in a
typical industrial environment on a tile floor. This
appliance contains no possible source of impact
noise. The instantaneous sound pressure level is
below 63 dBA.
3-1
DIMENSION/CAPACITY
36VDC
90 Amps
6 x 6 Volt 360 AH @ 20hr rate
2 x .75 hp (0.56 kW)
2 x .75 hp (.056 kW) @ 18,000 rpm
2 hp (.745 kW) @ 2700 rpm, 27A
2102 lbs. (953 kg)
914 lbs. (415 kg)
Gravity feed, fully variable with automatic shut-
off in neutral
35 gal. (132l)
35 gal. (132l)
17 in (43.0 cm)
6 in (15.2 cm)
32 in. (81.3 cm)
0-200 lbs. (0-91 kg)
200 rpm
800 rpm
4 x 16 in (40.64 cm) foam filled black knobby
standard.
6.2 mile/hour (10k/hr)
49,300 sq. ft/hr (4,590 sq. m/hr) at 3.5 mph
(5.6k/hr) with 2 in (5 cm) overlap.
Welded cold rolled steel and steel plate with
epoxy powder coat finish.
Dual self centering mechanical 6 in (15.24 cm)
disc with hand lock parking brake.
96 in (243.8 cm)
The weighted root mean square acceleration at
the operator's arms was measured to be below
2.5m/s². this was a tri-axial, third-octave-band
measurement made during normal operation on a
composite tile floor. The measurement and
related calculations were made in accordance
with ANSI S3.34-1986.
FLX3 980087 04/01/03
Advertisement
Table of Contents
