Windsor Flex 3 FLX3 Operating Instructions Manual page 19

8. RECYCLE SWITCH (OPTIONAL)
This switch controls the solution recycle pump. To start recycle pump, press the switch. A green light above
the circuit breakers will indicate that pump is on. The solution control switch will control the speed of the
pump and therefore the amount of solution flow to the scrub deck. Make sure there is an adequate amount of
water in recovery tank before starting recycle pump, and turn off recycle pump when water level reaches filter.
To stop the solution recycle pump, press the switch. The pump will stop and the green indicator light will turn
off, and the solenoid valve will resume control of solution flow to the scrub deck.
9. RECYCLE INDICATOR LIGHT (OPTIONAL)
This light will turn on when the recycle pump is on, and turn off when the recycle pump is off.
10. HEADLIGHT SWITCH (OPTIONAL)
Turns on optional headlight for improved visibility in low light areas.
FLX3 980087 04/01/03
CONTROLS
3-12