Electrical - Windsor Flex 3 FLX3 Operating Instructions Manual

11. FUSE
The fuse is a one-time circuit protection device
designed to stop the flow of electrical current in
the event of an electrical overload. If fuse is
blown, it must be replaced.
The fuse is located inside the electrical
compartment, under the seat.
12. CIRCUIT BREAKERS
Interrupt the flow of power in the event of an
electrical overload. When a circuit breaker is
tripped, reset it by pressing the exposed button.
If a circuit breaker continues to trip, the cause of
the electrical overload should be found and
corrected.
30 Amp
Protects the left scrub brush motor.
30 Amp
Protects the right scrub brush motor.
2 Amp. Protects the scrub deck
actuator.
2 Amp. Protects the squeegee
lift actuator.
FLX3 980087 04/01/03
MAINTENANCE
4-14