Technical Specifications - Windsor SABER GLIDE 10053070 Operating Instructions Manual

TECHNICAL SPECIFICATIONS

ITEM
Nominal power
Rated Voltage
Rated Amperage
Batteries
Scrub Brush Motors
Vacuum Motor(s)
Propelling Motor
Mass (GVW)
Weight empty without batteries
Solution Control
Solution tank capacity
Recovery tank capacity
Scrub brush diameter for 28 in. (71 cm) disk scrub head
Scrub brush diameter for 32 in. (81 cm) disk scrub head
Scrub brush diameter for 36 in. (91 cm) disk scrub head
Scrub brush pressure
Scrub brush speed
Tires – Front
– Rear
Foundation Pressure
Maximum Speed
Frame Construction
Brakes
Minimum aisle u-turn width with 28 in. (71 cm), 32 in. (81
cm) or 36 in. (91 cm) disk scrub head
Maximum rated climb and descent angle
3-1
86037580 GLIDE 06/26/12
DIMENSION/CAPACITY
2.9 kW
36 Volts DC
80 amps (28in & 32in)
95 amps (36in)
6 x 6 Volt 250-335 AH @20 hr. rate
2 x 1.0 HP (746 W) 28in & 32in
3 x 1.0 HP (746 W) 36in
1 x .75 HP (560 W) Standard, second motor
optional
1.3 HP (1000 W)
1810 lbs (820 kg) 28in & 32in
1840 lbs (835kg) 36in
790 lbs (360 kg) 28in & 32in
825 lbs (375 kg) 36in
Gravity feed, fully variable with automatic
shut off in neutral
30 gal (115 L)
30 gal (115 L)
14 inch (35.5 cm)
16 inch (40.6 cm)
12 inch (30.5 cm)
0-225 lbs (0-1000N) 28in & 32in
0-150 lbs (0-667N) 36in
300 rpm
11.8 in. (30.0cm) Solid Polyurethane
12 in. (30.5 cm) Solid Scrubber Compound
108 lbs./in² (745 kPa)
4.1 miles/hour (6.5 Km/hour)
Powder coated steel
Mechanical band with hand lock parking
brake
66 inches (168 cm)
7.5 degrees