Operations; Technical Specifications - Windsor Saber Cutter SC326 Operating Instructions Manual

Operations

Technical Specifications

Nominal power
Rated Voltage
Rated Amperage
Batteries
Scrub Brush Motors
Vacuum Motor
Propelling Motor
Mass (GVW)
Weight empty without batteries
Solution Control
Solution tank capacity
Recovery tank capacity
Scrub brush diameter 32 in. (81 cm) scrub head
Scrub brush pressure
Scrub brush speed
Tires
Casters
Foundation Pressure
Maximum Speed
Frame Construction
Brakes (optional)
Minimum aisle u-turn width with 32 in. (81 cm) scrub
head
Maximum rated climb and descent angle with empty
tanks and without optional parking brake
Maximum rated climb and descent angle with full tanks
and without optional parking brake
SPECIAL NOTES:
The sound pressure level at the operator's ear was measured to be 75 dBA. This was a nearfield, broad-band
measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of
impact noise. The instantaneous sound pressure level is below 63 Pa.
The weighted root mean square acceleration at the operator's arms was measured to be below 2.5m/s2 . This was
a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measure-
ment and related calculations were made in accordance with ANSI S3.34-1986.
10
ITEM
86400280 Operators Manual - Cutter 36V Standard
DIMENSION/CAPACITY
2160 W
36 Volt DC
60 amps
6 x 6 volt 250-305-335 AH @ 20 Hr rate
2 x .75 hp (.56 kW )
3 Stage .75 hp (.56 kW )
.75 hp (.56 kW )
1265 lb (574 kg) w/335 AH batteries
433 lb (196 kg)
Gravity feed, fully variable with automatic shut-off in
neutral
32 gal (118 L)
35 gal (123 L)
16 in (41 cm)
Mechanical, 80 lbs floating
130 lbs restricted (356n-578n)
200 rpm
2 x 12 in (30.5 cm) Non-Mark Foam Fill
2 x 4 in (10.2 cm) polyurethane, Non-Mark
64 lbs/in² (441 kPa)
3.2 miles/hour (5.2 kW/hour)
Powder coated steel
Tire lock parking
69 inches (175 cm)
2%
2%