How To Use This Manual; Safety - Windsor Flex 3 FLX3 Operating Instructions Manual

HOW TO USE THIS MANUAL

This manual contains the following sections:
HOW TO USE THIS MANUAL
-

SAFETY

-
- OPERATIONS
-
MAINTENANCE
-
PARTS LIST
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized dealer. When
placing an order for parts, the machine model and
machine serial number is important. Refer to the
MACHINE DATA box, which is filled out during the
installation of your machine. The MACHINE DATA
box is located on the inside of the front cover of this
manual.
MODEL
DATE OF PURCHASE
SERIAL NUMBER
SALES REPRESENTATIVE #
DEALER NAME
OPERATIONS GUIDE NUMBER
PUBLISHED
Copyright 2003 Windsor Industries, Printed in USA
The model and serial number of your machine are
located approximately where indicated.
The SAFETY section contains important information
regarding hazard or unsafe practices of the
machine. Levels of hazards is identified that could
result in product or personal injury, or severe injury
resulting in death.
1-1
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
that came with the kit. It contains replacement parts
numbers needed for ordering future parts.
NOTE: The 98# on the lower left corner of the front
cover is the part number for this manual.
FLX3 980087 04/01/03
Batteries
-
- Squeegee Assembly
- Scrub Head
Differential Drive Chain
-
Drive Wheel Chain
-
Brakes
-
Tires and Wheels
-
- Vacuum Motors
- Brush Motors
Towing and Pushing Machine
-
Storage
-
Service Schedule
-
Troubleshooting
-
REF – column refers to the reference
-
number on the parts illustration.
- PART NO. – column lists the part
number for the part.
QTY – column lists the quantity of the
-
part used in that area of the machine.
DESCRIPTION – column is a brief
-
description of the part.
- SERIAL NO. FROM – column indicates
the first machine the part number is
applicable to. When the machine design
has changed, this column will indicate
serial number of applicable machine.
The main illustration shows the most
current design of the machine. The
boxed illustrations show older designs. If
column has an asterisk (*), call
manufacturer for serial number.
- NOTES – column for information not
noted by the other columns.