Windsor Flex 3 FLX3 Operating Instructions Manual page 17

7. DISPLAY TOGGLE SWITCH
The display toggle switch allows you to change the information display screen. Two screens are available.
•
INFORMATION DISPLAY –SCREEN 1
•
INFORMATION DISPLAY –SCREEN 2
•
The hour meter is viewed on screen 2 of the information display. Hours are displayed for key ON
time, brush run time, and traction motor time.
•
Fault codes/icon will appear on either display screen when the controller detects a problem within
the electrical system. The codes/icons are used to assist users as well as service technicians in
identifying and correcting problems. See troubleshooting section for more information on fault
codes. The machine must be keyed off, then on again, to clear fault code after repair.
Key ON Hours:
Records the entire time that the key is on.
Brush Run Time:
Records the time spent with the brushes
running and gives true brush motor time.
Traction Motor Time:
Records the time spent propelling the
machine and gives true traction motor time.
FLX3 980087 04/01/03
CONTROLS
3-10