DoorKing 6050-080 Installation And Owner's Manual page 4

Use this manual for the Model 6050/6100 operators with circuit board 4502-010 Rev K or higher ONLY.
UL325 Class of Operation
Type of Gate
Inherent Entrapment Protection Device
External Entrapment Protection Device Inputs
Installation of ONE MONITORED external entrapment protection device MUST be installed or operator WILL NOT function.
Type
Model #
Operator
6050-080 Primary
6050-081 Secondary
6100-080 Primary
6100-081 Secondary
Pad Mount Kit
P/N 2600-671
23" Standard
18"
Post Mount Kit
P/N 2600-674
11"
DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any
persons of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is
copyrighted, all rights reserved. No portion of this manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written
consent from DoorKing, Inc.
4
6050 / 6100 SPECIFICATIONS
For operators manufactured July 2011 and later.
(Monitored Inputs)
Horsepower - Volts
1/2 HP - 115 VAC
1/2 HP - 115 VAC
1/2 HP - 115 VAC
1/2 HP - 115 VAC
5"
11"
9.5" 6"
5"
Model 6050 Class I Only ; Model 6100 Class I, II, III, IV
Vehicular Swing Gates Only
Inherent Reverse Sensor System (Type A) - Adjustment is NOT needed.
Inherent Adjustable Clutch (Type C) - Adjustment is needed for UL compliance.
Connection inputs for Non-contact Sensor - Photo Sensor (Type B1)
Connection input for Contact Sensor - Reversing Edge (Type B2)
Max Gate
Amp
Weight
4.3 400 Lbs.
4.3 400 Lbs.
5.4 500 Lbs.
5.4 500 Lbs.
Arm Assembly
Arm Assembly
Max Gate Cycles Per
Length
Hour
10 Ft. 10
10 Ft. 10
14 Ft. 60
14 Ft. 60
13.5"
6.75" 6.75"
Distance can vary.
6" minimum.
2.25"
Speed
90°
12-14 Sec
12-14 Sec
12-14 Sec
12-14 Sec
11"
10.5"
6050-065-C-2-16