Swing Gate Requirements - DoorKing 6050-080 Installation And Owner's Manual

Swing Gate Requirements

The operator is intended for installation only on gates used for vehicles.
access opening. The pedestrian access opening shall be designed to promote pedestrian usage. Locate the gate such that
persons will not come in contact with the vehicular gate during the entire path of travel of the vehicular gate.
(ref. UL325 56.8.4.b)
Closed Gate
A If distance is greater than 4 inches,
entrapment protection for this area is
required. ASTM F2200 7.1.1.1
B If distance is less than 16 inches,
entrapment protection in this area
is required. ASTM F2200 7.1.1.2
Gates shall have smooth bottom edges, with vertical bottom edged protrusions not exceeding 0.50 inches. ASTM F2200 4.3
6
Closed Gates
A
Not Allowed
Pedestrians must be supplied with a separate
With the hinge mounted on
the corner of the pilaster,
the entrapment area
eliminated and protection
is NOT required for this
area.
B
Closed Gate
is
A
OK
6050-065-C-2-16