y
Control Panel
Select main source / PIP source, enable/disable PIP/PBP, change the
layout / PIP size, swap, and change the test pattern.
y
Projector Information Panel
Check the projector information for power status, Pic mute status, OSD
status, IP address and Mac address.
y
Switch Panel
Switch the on/off status of power, Pic mute, and OSD.
4.9.3 Main Tabbed Page – Status
Display the current status of lamp info, cooling (fans), version numbers and
signal (source) information
G Series User Manual
020-000648-01 Rev. 3 (02-2014)
Section 4: Operation
4-23