Christie D12HD-H User Manual page 43

• Manual Adjustment
1 Adjust color slide bars and judge image color by eye or meter. A user-
defined color "adjustment" can be applied.
2 Use this submenu if you do not have specific color coordinates in mind
and will judge color performance by eye or meter. As for Meter
Adjustment, each color control actually defines new x/y coordinates for
that color and changes its hue. The main colors (red part of red, green
part of green and blue part of blue) adjust the intensity of that color
component, while the modifying colors (for example, green part of red
and blue part of red) modify the x and y value and change the hue of
that color. At the same time, the main colors are also used to control the
color of the white point.
Hot-Key Settings
Assign a different function to the hot-key on the remote control by highlighting
the function in the list and pressing ENTER. Choose a function that does not
already have a dedicated button, and assign the hot-key to that function,
allowing you to quickly and easily use the chosen function.
Service
• Projector Info: Display current projector settings (read-only).
• Factory Reset: Restore all settings to their default value. It does not reset
network but it resets RS232.
• Test Pattern: Choose the desired internal test pattern to display, or select
OFF to turn off a test pattern.
• Color wheel Index (2x): Set Color wheel index to Speed 2X. This setting
only needs to be used when the Main Board is changed, and should be
adjusted to optimize picture quality.
H Series User Manual
020-000772-02 Rev.1 (08-2015)
Green
Blue
Section 4: OPERATION
Measured
Data
Target Data
Red
4-12