Christie D12HD-H User Manual page 55

• Restart Network
Execute a Network restart. This does not change any of the network
settings.
• Network Factory Reset
Execute a network factory reset. Network settings may be reset to the
following default values:
- Projector Name = Christie@ + Serial Number
- Show Network Messages = ON
- LAN Settings:
-
-
-
-
- WLAN Settings:
-
-
-
-
-
- SNMP Settings:
-
-
-
-
- Trap Configuration:
-
• LAN Setting Panel
- Select if the projector must obtain an automatically assigned IP address
through DHCP or if the user set the address manually.
- Enter the IP address, netmask, and default gateway address for the
TCP/IP setting.
• WLAN Setting Panel
- Select if the wireless LAN of the projector is enabled or disabled.
H Series User Manual
020-000772-02 Rev.1 (08-2015)
Manual
IP Address = 192.168.0.100
Subnet Mask = 255.255.255.0
Default Gateway = 192.168.0.100
Enabled
Start IP = 192.168.1.100
End IP = 192.168.1.120
Subnet Mask = 255.255.255.0
Default Gateway = 192.168.1.100
SNMP Read Communication = private
Trap IP Address = 0.0.0.0
SMTP IP Address = 0.0.0.0
All other settings are cleared/blanked
All items = SNMP Trap + Email
Section 4: OPERATION
4-24