Christie D12HD-H User Manual page 16

Section 2: INTRODUCTION
Ind.
1 SHUTTER
2 Power on
3 Gamma
4 Bright
5 PIP/PBP
6 Size
7 Number Keys
8 Help
9 Menu
10 Arrow Keys
11 Test
12 Auto
13 OSD
14 Keystone H
15 Keystone V
16 Standby
17 Contrast
18 Hot-key
19 Swap
20 Layout
21 Focus
22 Zoom
23 Proj Key
24 Exit
25 Enter
26 Input
27 Info
28 Lens H
29 Lens V
2-7
Part Name
Display or blank the video image.
Turn projector ON.
Adjust mid-range levels.
Adjust amount of light in the image.
Turn PIP/PBP ON/OFF.
Adjust the PIP/PBP size.
Enter a number, such as a channel, value, and so on.
Display the instruction for source connection.
Display menus.
•
•
Display a test pattern.
Automatically optimize image.
Use to hide or show OSD menus.
Adjust the horizontal keystone.
Adjust the vertical keystone.
Turn projector OFF.
Adjust difference between dark and light.
Select your preset keys quickly.
Swap the main and PIP/PBP images.
Adjust the PIP/PBP layout.
Adjust focus to improve image clarity as desired.
Adjust zoom to achieve a desired image size.
Change the remote ID. Press Proj Key then a number
between 1 and 9 to assign an ID. Press PROJ then
number 0 to return to the universal remote ID.
Return to previous level or exit menus if at top level.
•
•
Select an input for the main or PIP/PBP image.
Display source image information.
Horizontal Lens Shift - Adjust the position of the image
horizontally.
Vertical Lens Shift - Adjust the position of the image
vertically.
Description
Adjust a setting UP or DOWN.
Navigate within a menu.
Select a highlighted menu item.
Change or accept a value.
H Series User Manual
020-000772-02 Rev.1 (08-2015)