Christie D12HD-H User Manual page 42

Section 4: OPERATION
• Serial Port Echo: Control whether the serial port echoes characters.
• Serial Port Path: Select the serial port path from either RS232 or HDBaseT.
• Projector Address: Set the projector address (0-9). The projector responds
to IR remotes set either at the same address as the projector or to IR
remotes set to address 0.
Backlight Preferences
Control the back light behavior and timeout setting for the keypad and status
LED.
Color Matching
You may require a unique color gamut (range) for a single projector or
application, or you may need to precisely match colors across multiple
adjacent displays. Use Color Matching by Meter Adjustment or by Manual
Adjustment to define the precise hue of each primary color component (red,
green, blue and white).
The x/y coordinates for each color define its location on the standard CIE
chromaticity graph. Changing either or both of these numbers may change the
hue of the color, and modify the range of possible colors. For example,
changing the x/y coordinates for red may move the color closer to orange or
closer to violet, which in turn affects all displayed colors having a red
component. Adjust the slide bars or enter new specific coordinates as desired
to define or change the color gamuts needed for your environment and
applications.
Enable the selected method (Meter or Manual Adjustment)-this automatically
disables the other method. For both methods, if Auto Test Pattern is enabled,
the solid colored test pattern can be displayed according to the menu item on
which you are positioned.
• Meter Adjustment
1 Using a color meter, enter the current x and y co-ordinates of Red,
Green, Blue and White for the projector image into the Measured Data
menu. This is the reference point for the projector. The default values in
the menu are based on the average for all projectors.
2 After measuring the values for all the projectors to be matched,
calculate the target values.
3 Enter the target values for x, y and gain for each color into the Target
Data menu.
4-11 H Series User Manual
020-000772-02 Rev.1 (08-2015)