Section 3: INSTALLATION
3.8
Fuse Installation
1. Turn off the projector: Turn the projector off.
2. Wait for projector to cool down: Allow the projector to cool down into
standby mode.
3. Take off rear fan cover by releasing one screw on the cover.
4. Release the fuse and replace the new one.
NOTE:
For high rating region (200~240v), it should use a 10 amp or 15 amp fuse.
For low rating region (100~120v), it should use a 20 amp or 15 amp fuse.
3-11
H Series User Manual
020-000772-02 Rev.1 (08-2015)