Section 4: OPERATION
•
Control Panel
Select main source / PIP source, enable/disable PIP/PBP, change the
layout / PIP size, swap, and change the test pattern.
•
Projector Information Panel
Check the projector information for power status, Pic mute status, OSD
status, IP address and Mac address.
•
Switch Panel
Switch the on/off status of power, Pic mute, and OSD.
4.9.3
Display the current status of light source, cooling (fans), version numbers and
signal (source) information
4-23
Main Tabbed Page - Status
GS Series User Manual
020-000724-01 Rev. 1 (05-2014)