Auto Power Option (Ap); End Of Cycle Beeps (Ec); Closed Drawer Option (Ld); Clean/Dirty Dish Symbol (Ds) - Fisher & Paykel DishDrawer DD605 Service Manual

599447A
Note: On an integrated DishDrawer™ when the user turns on or turns off one of the following options, it is indicated by
the red wash cycle LEDs on the secondary control panel. If an option is turned on, then all the LEDs turn on, and if an
option is turned off, all the LEDs turn off.

4.1.4 Auto Power Option (AP)

The automatic power up sequence that occurs when the tub is opened can be turned on or off using the KEYLOCK
button. If the scrubbing brush symbol is showing on the LCD, then the auto power up sequence will occur when the tub
is opened. If the scrubbing brush symbol is not showing, then the DishDrawer™ will not automatically power up when
the tub is opened (and the customer will need to push the power button each time they want to use the DishDrawer™).
Push POWER to exit when the desired setting has been selected.

4.1.5 End of Cycle Beeps (EC)

The six beeps that occur at the end of every cycle can be turned on or off using the KEYLOCK button. If the scrubbing
brush symbol is showing on the LCD, then the end of cycle beeps are activated. If the scrubbing brush symbol is not
showing, then the end of cycle beeps are deactivated. Push POWER to exit when the desired setting has been selected.

4.1.6 Closed Drawer Option (Ld)

The closed drawer option can be turned on or off using the KEYLOCK button. If the scrubbing brush symbol is showing
on the LCD, then the closed drawer option is selected and it will keep the DishDrawer™ locked at all times by bringing
the lid down when the drawer is closed. When this mode is selected, the customer needs to push the power button to lift
the lid whenever they want to open the drawer. When they close the drawer again the lid comes down automatically after
30 seconds and locks the tub closed. If the scrubbing brush symbol is not showing, then the closed drawer option is
deactivated. Push POWER to exit when the desired setting has been selected.

4.1.7 Clean/Dirty Dish Symbol (dS)

(Only displayed on prefinished models with LCD)
The clean/dirty dish symbol can be turned on or off using the KEYLOCK button. If the scrubbing brush symbol is
showing on the LCD, then the clean/dirty dish option is selected. This means the clean/dirty dishes symbol will remain in
the LCD display at the end of the cycle until the power button is pressed to clear it. If the scrubbing brush symbol is not
showing, then the clean/dirty dish symbol will disappear when the drawer is first opened at the end of a cycle. Push
POWER to exit when the desired setting has been selected.
21