Download
Share
Print this page
Fisher & Paykel DishDrawer DD605 Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Fisher & Paykel Manuals
  4. Dishwasher
  5. DishDrawer DD605 Series
  6. Installation instructions manual
Fisher & Paykel DishDrawer DD605 Series Installation Instructions Manual

Fisher & Paykel DishDrawer DD605 Series Installation Instructions Manual

Hide thumbs Also See for DishDrawer DD605 Series:

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction and Installation Manual
Installation
instructions
DD605 and DS605 model
OishDl a _e_

Advertisement

loading
Need help?

Need help?

Do you have a question about the DishDrawer DD605 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Fisher & Paykel DishDrawer DD605 Series

Summary of Contents for Fisher & Paykel DishDrawer DD605 Series

  • Page 1 Installation instructions DD605 and DS605 model OishDl a _e_...
  • Page 2 Safety and warnings Electrical hazard Before installing the DishDrawer ® , remove the house fuse or open the circuit breaker. if permanently connecting the D[shDrawer% be sure the power is isolated and the DishDraweF _unplugged. Failure to do so may result in eJectrica[ shock or death Take care ,_pane[ edges are sharp.
  • Page 3 DOUBLIE/VIODIE/,,,,S PIl°oduct alsd calbilset_°y dimensions Installation Cavity ip_epal_atio_ Route rise Ihoses and move i_sto rise cavity Removit_g rise tub alsd leveIH_"_g the pll°oduct Secur@3gthe iplL°oductand refitting the b4b Plumbilr_ 9 and drainage - OIPTION I Plumbing alnd @ailr_age OPTION 1 (connection Plumbing and @ahsage OPTION 2 Plumbing and @ailnage - OPTION 2 (connection Fitting _he _oekick...

  • Page 4: Product Dimensions

    Product dimensions / S ,iii i'f !:)!//_, ,i i )_!_, Product dimensions (mm) overall height* of pFocJ_c_ 819.5 - 879.5 819.5- 879.5 819.5 - 879.5 ove_a I wclth of: p_oduct overall cleplh of D_oduct e×cl curw¢ ire/harMle) depth of @awe (operO (e×c[.

  • Page 5: Cabinetry Dimensions

    Cabinetry dimensions ?",,,, ../y" iiiiiiiiii?iiiiiiii?iiiiiiiiiiiiiiiiiiiiiiiii Cabinetry dimensions (ram) "_ in_:, _e hegh_ of o_vty 820- 882.5 820- 882.5 820- 882.5 r_de depth o_ cavity (in id_) heigh_ of kick_,t_ ip 70 - 120 70 - 120 70 - 120 Minimum clearances (ram) 13mm...
  • Page 6 Cavity pt_epa_ation Parts supplied Drain hose Wire clip (2) Clamp (1) Install Phillips Moisture tabs (2) 16 mm protection screws (% tape (1) ddmdge) If the Drain hose(s)supplied are not long enough to reachyour services,you must use a Drain HoseExtension Kit P/N 525798which will extend the drain hose(s)by 3.dm.The kit is available from the nearestFisher&...
  • Page 7 Route the hoses and move into the cavity ....I/iS IIII]IIIIII] /.... iiiiiiii ..... i "_'Tetogether to avoid kinking If top two tabs are being ......s. _) used, ensure they're securely _" fitted before sliding product into cavity. optional Loosen feet first, but do not fully extend until product is in cavity.
  • Page 8 Removin9 the tub and _eveHin9 the product Ensure the tub is removed and then rotated counter-clockwise to prevent kinked hoses. Ensure product is level. Using the most appropriate length Hexagonal socket supplied, and a screwdriver, fully extend levelling feet up to required distance. Hexagonalsocket ×4...
  • Page 9 Secudn9 the product and refitting the tub The mounting tabs are in pairs, one on each side of the product. At least two sets of tab pairs must be used. A and B tab pairs ORB and C tab pairs or all three pairs.
  • Page 10 Humbing and drainage -OPTmON 1 DishDrawer ® and Standpipe O38 mm min. R200 mm Drain hose 2011 mm 1794 mm Inlet hose 1561 mm 1344 mm Powercord 1776 mm 1559 mm Water Pressure Water softener models 1 MPa (145 psi) 0.1 MPa (14.5 psi) Other models 1 MPa (145 psi)
  • Page 11 Humbing and drainage - OPTION 1 (connection DishDrawer ® and Standpipe _38 mm ......If space is limited for fixing, push hose -- through drain hose ..support to required ........height ........,,,,,,% "%...
  • Page 12 P_umbing and drainage - OPTmON 2 DishDrawer ® using sink trap with drain hose joiner min. R200 mm...
  • Page 13 Humbing and drainage : OPTION 2 (connection DishDrawer ®using sink trap with drain hosejoiner If space is limited ......for fixing, push hose ..through drain hose ...._ support to requir height Z50- i882.5 i mm sarerout omer. Rempv_ material if_...
  • Page 14 Fittin9 the toekick Important! D o not overtighten screw,...
  • Page 16 Product dimensions °_ Product dimensions (mm) overall height o[pr(duct overa I width of p_oduct overall depth of product (ex[ curvature/handlu) 570 xx dept] of drawe_ (open) (excl curvat lie/handle) heght _ o[ chassis depfl_ o[ chass s depl[" of @awer hont panel (exd curva ure/h ndle)
  • Page 17 Cabinet y dimensions :Iii_Fio_ <1;,'< t<;,' 5/<:t //( FIiFP,f ,,: tp s ,<:!_2 Cabinetry dimensions (mm) insde depth of cav _)' (inqde} c ealal_ce below benc _top Minimum 3 _ Minimum 3 _ Minimum 32 Clearai_ce is measured from ..................... Minimum clearances (mm) 13mm...
  • Page 18 Cavity preparation Cavity If the Drain hose(s)supplied are not Eongenough to reachyour services,you must use a Drain HoseExtension Kit P/N 525798which will extend the drain hose(s)by 3.6m.The kit is availablefrom the nearestFisher& Paykel Authorized ServiceAgent or www.fisherpaykel com. DO NOTextend beyond this limit. Moisture 10 mm protection...
  • Page 19 Route the hoses and move into the cavity Tie together to avoid kinking Ensure hoses and cord are not kinked or twisted.
  • Page 20 Removin9 the tub and securin9 the product © Ensure the tub is removed and then rotated counter-clockwise to prevent kinked hoses. The mounting tabs are in pairs, one on each side of the product. Ensure the sound insulation is repositioned correctly.
  • Page 21 Refittin9 the tub Ensure the tub clips on ! 1_:_, both sides are reset. ku: _ } _,' " ..,111111% Before refitting the tub, ensure the hoses are not twisted and the latches the rear of each drawer runner are facing forward.
  • Page 22 Humbing and drainage -OPTmON 1 DishDrawer ® and Standpipe O38 mm Drain hose 2011 mm 1794 mm Inlet hose 1561 mm 1344 mm Powercord 1776 mm 155g mm Water Pressure N/in Water softener models 1 MPa (145 psi) 0.1 MPa (14.5 psi) Other models 1 MPa (145 psi) 0.03 MPa (4.3 psi)
  • Page 23 Humbing and drainage : OPTION 1 (connection DishDrawer ® and Standpipe _38 mm If space is limited for fixing, push hose -- through drain hose support to required...
  • Page 24 Humbin9 and drainage -OPTmON 2 DishDrawer ®using sink trap with drain hosejoiner > HIGHLOOP min. 150 mm...
  • Page 25 Humbing and drainage - OPTION 2 (connection DishDrawer ®using sink trap with drain hosejoiner ..... If space is limited ....for fixing, push through drain hose ........support to requi ..h#ight ....

  • Page 26: Final Checklist

    Final checklist Check all parts are installed. Ensure product is level, securely fastened to the cabinetry and opens and closes freely. The DishDrawer ® must be free to fully close with no resistance from the cabinetry. Ensure inlet hose to water supply has rubber washer fitted and is tightened a further half turn...
  • Page 27 Co syr/gnr o k sher & Pay tel 2007. AI £ _[s _eservea eCLiLCa_lor',s n mls DO©K(_L dbE l//8 JOOC('tS c ](_ r XJttels RDOQ >su(t UHU('I )[G(3[]YIIISOU )(b,:/_ [I]OSI s SIz_ L-_Jk u_ J_ H a Br3 f1(_[ _ ST l_1"1@ IU LI/U ©[©/@...

This manual is also suitable for:

Dishdrawer dd5605 series