Safety; Safety Guidelines, English Language - Pace ST 65 Operation & Maintenance Manual

Safety

Safety Guidelines, English Language

The following are safety precautions which personnel must understand and follow
when using or servicing this product.
1. POTENTIAL SHOCK HAZARD - Repair procedures on PACE products
should be performed by Qualified Service Personnel only. Line voltage
parts may be exposed when the equipment is disassembled. Service
personnel must avoid contact with these parts when troubleshooting the
product.
2. To prevent personnel injury, adhere to safety guidelines in accordance
with OSHA and other applicable safety standards.
3. SensaTemp handpiece heaters and installed tips are hot when the
handpiece is powered on and for a period of time after power off.
DO NOT touch either the heater or the tip. Severe burns may
result.
4. PACE Tip & Tool Stands and handpiece cubbies are designed
specifically for use with the associated handpiece and houses it in
a manner which protects the user from accidental burns. Always
store the handpiece in its holder. Be sure to place the handpiece
in its holder after use and allow to cool before storing.
5. Always use PACE systems in a well ventilated area. A fume
extraction system such as those available from PACE are highly
recommended to help protect personnel from solder flux fumes.
6. Exercise proper precautions when using chemicals (e.g., solder
paste). Refer to the Material Safety Data Sheet (MSDS) supplied
with each chemical and adhere to all safety precautions
recommended by the manufacturer.
4