Group Name Setting - Mitsubishi Electric G-50A Instruction Book

5 - 6 Group name setting

( 1 ) Setting method
• Specify new group name.
• Either alphabet, numeric characters, hyphens or spaces can be used for name setting.
• Maximum of ten characters can be set.
• When the group name is displayed on the operation monitor screen, the first three characters of the group name
are displayed.
NEXT
1 Press the (or
1
(or"4. GROUP SETTING") of the initial setting menu.
2
The group configuration setting screen is displayed.
3
GROUP
Press the
SELECT
be set in the group name setting.
4
Press the ENTER switch one time.
The group name setting screen is displayed.
5 The character " " is displayed in reverse.
Press the
6
sired character.
Press the switch.
7 ENTER
The selected character is displayed in the group name display area.
8
Repeat operation
6
When incorrect character is set, refer to section "Group name correc-
tion method (page 32)" .
Group name display area
-31-
)switch to select"1. GROUP SETTING"
4
switch to display the group number which will
switch to move the cursor to the de-
or 7 and set the group name.