Mitsubishi Electric G-50A Instruction Book page 19

(2) Collective prohibit setting
The collective prohibit setting is excused.
6
The collective prohibit setting takes approximately
20 seconds.
1 Press the
display and press the
initial screen.
2
The collective prohibit setting initial screen is displayed.
3 Select the items to be prohibited or permitted on the collective prohibit
setting initial screen.
Each time to press the switch corresponding to the prohibition item,
the prohibition or permission is selected.
Prohibition setting : The prohibited item is displayed in reverse with
Permission setting : The permitted item is displayed with blinking.
The selection method concerning to prohibit/ permit item is same as de-
scribed in section "4-2-1 (1) Local remote control operation prohibit
setting". ( page 14 )
4 The items selected for the prohibition or permission are displayed with
blinking.
And the "SET" is displayed with blinking in the function area.
5 When all setting are completed, press the
plete this settings.
7
The collective setting prohibition/permission item
setting is completed when the previous item light.
After setting of prohibit/permit items, press the
8
BACK
SCREEN
setting initial screen.
-17-
switch to set "PROH. (PROHIBIT)" in blinking
ENTER switch on the collective operation setting
blinking.
ENTER
switch to back to the collective operation
switch one time to com-