Malfunction - Mitsubishi Electric G-50A Instruction Book

4 - 4 Malfunction

• The malfunction monitor function is used for conforming to the details of the malfunction condition when a
malfunction is displayed on the operation monitor screen.
• The malfunction monitor function can display data describing up to nine malfunctions in the address number se-
quence on one page. This data contains the unit address where the malfunction occured, the error code and the
unit address where the malfunction was detected.
• After checking the unit address where the malfunction occurred and the error code, please contact your dealer
or technical representative as soon as possible.
< Shifting to the malfunction monitor screen >
Press the switch to
4
select "4 MALFUNCTION MONITOR".
The unit address
where the malfunction occurred
NOTE :
When there is no malfunction taking place, [ NO ERROR ] lights up instead of [ ERROR CODE ].
Page change operation
The page change operation is performed by the
Pressing the
Pressing the
Malfunction reset operation
RESET
Press the reset
The reset operation can be performed on any page.
NOTE :
When operation of the G-50A is prohibited, reset operation is invalid.
Error code
or switch shows the current display page +1.
or switch shows the current display page -1.
switch to reset all malfunctions.
DEL.
Press the
to the user operation menu screen.
The unit address
where the malfunction was detected
switch.
-23-
BACK
switch to go back
SCREEN