Mitsubishi Electric G-50A Instruction Book page 7

Item
Prohibit local
remote
control
Timer operation
Operation
Filter sign
reset
Ventilation
operation
Collective
operation
Each group
operation
Operation
mode
Fan speed
Air direction
Temperature
setting
Timer
operation
Filter sign
Local remote
Monitor
control
prohibition
Ventilation
operation
Room
temperature
display
Central control
prohibition
External
input signal
condition
Malfunction
Current time
back-up
Other
Timer setting
The specific functions of a local remote controller can be prohibited as a collective or
per group.
[Prohibit function]
ON/OFF operation, Operation mode setting, Temperature setting and Filter sign
reset operation.
The set schedule operations can be switched to ON/OFF (local remote controller
operation prohibition/permission) for each group.
The filter sign reset operation after the air filters are cleaned can be performed as a
collective or per group.
The ventilation operation of the interlocked OA processing unit or LOSSNAY can be coll-
ective or per group.
[Ventilation operation]
*1
Low speed/High speed/Ventilation OFF
*3
The overall status lamp displays conditions of the collective statues.
Each group operation is displayed on the operation setting screen (group) or operation
monitor screen.
Displayed on the operation setting screen (group).
*3
The unit address and error code are displayed on the malfunction monitor screen when
a malfunction occurs.
When the power is cut off, the current time is backed up for approximately one week.
(When the controller is fully charged. The controller is fully charged by twenty-four
hours after power feed.)
Operation pattern setting can be performed.
• Operation interval : Minimum 10 minutes
• The daily operation pattern and weekly schedule for each group can be set.
• A pattern of one day : P1/P2/P3/
* ON/OFF setting up to three times a day are possible for P1/P2/P3.
* P4 enables to set operation prohibition of 3 times per day for the remote controller.
* P1 / P2 / P3 implement the schedule which has combined P1/P2/P3 of ON/OFF
pattern and P4
( P1 = P1 + P4
* - is a day without timer operation.
• "The reference temperature and set-back value" or "Setting temperature" which are
linked with timer operation can be set.
Specification
P1 / P2 / P3
of remote controller operation prohibition pattern together.
/ P2 = P2 + P4 / P3 = P3 +
-5-
/ P4 / -
P4 is displayed.)