User Operation - Mitsubishi Electric G-50A Instruction Book

4 . User operation

Used the following two screens when user operation is performed.
Operation monitor screen
Operation setting screen
• The collective operation can be performed on any screen (except for the menu screen) in the user operation
mode
<Shifting to the operation monitor screen and operation setting screen>
Press the
1
select "1. OPERATION MONITOR"
The unit operation can be verified in
a single glance.
Refer to section "4-1 Operation
condition monitor".
<Returning to the user operation menu screen>
BACK
Press the (back screen) switch.
SCREEN
....... This screen displays ON/OFF and malfunction condition of unit.
G-50A normally displays this screen.
........ The unit operations can be performed by individual group or collective
operation. These operation include the ON/OFF, operation mode, fan speed,
temperature setting, air direction, ventilation setting, timer operation
ON/OFF, local remote controller prohibition and filter sign reset are
performed by group or collectively. In addition, this screen can also displays
the room temperature of each group.
switch and
Press the
Press the
"MON. (MONITOR)" on the blinking
display and press the
BACK
Press the switch.
SCREEN
ENTER
switch.
or switch to set
ENTER
switch.
Press the
to set "COL. (COLLECTIVE)" or
"GROUP" on the blinking display
and press the
-10-
Press the 2 switch and
select "2. OPERATION SETTING"
(Individual group
or switch
operation setting
screen)
ENTER
switch.
(Collective
Each unit operation
setting is performed.
Refer to section "4-2 Operation setting".
operation
setting screen)