Mitsubishi Electric G-50A Instruction Book page 45

Weekly schedule setting screen
BACK
SCREEN
P1 P4
+
ENTER
Schedule parttern setting screen
4
BACK
SCREEN
The unit address
where the malfunction occurred
NOTE :
5
BACK
SCREEN
Current time setting screen
22-09-2002 SUN
• GROUP
SELECT
•
CLOCK / PATTERN
•
/
5 8
• ENTER
* Repeat assign the schedule pattern to each day (and each group)
NOTE :
* P1 to P3
BACK
SCREEN
•
CLOCK / PATTERN
•
/
5 8
•
ENTER
* Repeat set schedules.
* Three types (P1-P3) of daily ON/OFF pattern and one type (P4) of prohibition/
permission pattern are available respectively, each of which can be set for each
group.
Malfunction monitor screen
The unit address
where the malfunction was detected
Error code
When there is no malfunction taking place,[NO ERROR] lights up instead of [ERROR CODE].
When operation of the G-50A is prohibited,reset operation is invalid.
•
•
8
5
* Set the date day, month, year and time.
• ENTER
00:00
* The clock count will start with the second reset to 0.
: Change the display group.
: Move the cursor to the pattern position.
: Select P1 to P4 or ( - )
: Complete the setting.
The cursor will move to the next setting position.
When the No.4 function select is set ON, P4 connot be set.
of a composite pattern composed of P1 to P3 and P4.
: Move the cursor position.
: Select the ON(PROHIBITION) time or OFF
(PERMISSION) time.
(Time is changed by 10 minutes unit.)
: Complete the setting. The cursor moves to the next setting p
•
RESET
• : Reset all malfunctions
DEL.
: Move the cursor position
: Set the number or day
: Press this switch, where all setting have been completed.
-43-
: Change the pages
or = page + 1
or = page - 1