Using The Message Button; Leaving Messages; Retrieving Messages - Inter-Tel 8500 User Manual

U M
SING THE ESSAGE
In today's busy world, it's almost guaranteed that you will call someone that is on
another call, does not answer, or is in DND. But, with the
the other person know you called.
When you leave a message, you can:
•
Have the called party return your call. When the party you called responds to
the message indication, a call is automatically placed to your endpoint.
•
Leave a message with the called party's message center (which can be a per-
son or voice mail). When the party you called responds to the message, a call is
automatically placed to his or her message center instead of your endpoint.
To indicate that a message is waiting, your endpoint's

Leaving Messages

To leave a station message while on an intercom call, press
To leave a voice mail message while on an intercom call, press
the message center to answer.
To leave a silent message without placing an intercom call:
Dial
1.
Dial the desired extension number and hang up to leave a station message.
2.
To cancel a message that you left at another endpoint:
Dial
1.
Dial the extension number of the endpoint where you left the message.
2.

Retrieving Messages

To retrieve a message (Message button and lamp are flashing):
Lift the handset and press
message center that left the message. (See the following section for information about
accessing your mailbox.)
To cancel a waiting message:
Press
3 6
®
Inter-Tel Model 8500 User Guide
B
UTTON
.
3 6 7
.
3 6 6
. A call is automatically placed to the endpoint or
MSG
.
8
button, you can let
MSG
button and lamp flash.
MSG
and hang up.
MSG
and wait for
MSG
29